General Purpose Single-Phase Motors
Description of the catalogue motors:
general purpose motors; temperate climate,
duty S1,
rated voltage 230V,
frequency 50 Hz,
ambient temperature from -15°C to +40°C,
standard paint colour RAL 5010.
Single phase motors are manufactured within the range
of frame size 56-90 as:
motors with standard starting torque (with capacitor run),
motors with increased starting torque (with capacitor run and specially adjusted parameters),
motors with high starting torque (with capacitor run, capacitor start and centrifugal switch).
Click here for more information
Description of the catalogue motors:
general purpose motors; temperate climate,
duty S1,
rated voltage 230V,
frequency 50 Hz,
ambient temperature from -15°C to +40°C,
standard paint colour RAL 5010.
Single phase motors are manufactured within the range
of frame size 56-90 as:
motors with standard starting torque (with capacitor run),
motors with increased starting torque (with capacitor run and specially adjusted parameters),
motors with high starting torque (with capacitor run, capacitor start and centrifugal switch).
Click here for more information
Single-phase induction motors frame size 100mm and 112mm series ShR
Description of the catalogue motors:
- general purpose motors; temperate climate,
- duty S1,
- rated voltage 230V,
- frequency 50 Hz,
- ambient temperature from -15°C to +40°C,
- standard paint colour RAL 5010.
SEhR version frames of motors made of drawn aluminium section.
Applying new modern technology in manufacturing new series we reached: noise level of
motors is one acoustic class lower, higher efficiency, less weight, longer life of motors,
improvement of durability of parameters.
The series meets requirements of Polish Standard PN-EN 60034-1, international regulations
IEC 60034-1 and is completely interchangeable with 'g' series.
Click here for more information
Description of the catalogue motors:
- general purpose motors; temperate climate,
- duty S1,
- rated voltage 230V,
- frequency 50 Hz,
- ambient temperature from -15°C to +40°C,
- standard paint colour RAL 5010.
SEhR version frames of motors made of drawn aluminium section.
Applying new modern technology in manufacturing new series we reached: noise level of
motors is one acoustic class lower, higher efficiency, less weight, longer life of motors,
improvement of durability of parameters.
The series meets requirements of Polish Standard PN-EN 60034-1, international regulations
IEC 60034-1 and is completely interchangeable with 'g' series.
Click here for more information
Single-phase induction motors to be built-in
- general purpose motors; temperate climate,
- duty S1,
- rated voltage 230V/400V ,
- frequency 50 Hz,
- ambient temperature from -15°C to +40°C.
Motors for building-in of size 56-90 are intended for
driving of appliances, where instead of separate housing it is more convenient to make use of
the frame of driven mechanism as a motor housing.
The bulid-in motors do not have their own housing. It is consists of sub-assemblies as
follows: wound stator core, wound rotor core as a cage casted from aluminum.
Stator core has a winding made from copper wire from which 3 leads are led out. These
outlets, suitable marked, are connected to the beginnings and the ends of phases.
Rotor with cast squirrel cage is delivered as a rough state without a shaft.
Protection degree of bulid-in motors is to be solved by a user, i.e. protection against touch,
penetration of solid bodies and water.
Other details and sub-assemblies such as: complete terminal boxes and fans can be
available on request
Click here for more information
- general purpose motors; temperate climate,
- duty S1,
- rated voltage 230V/400V ,
- frequency 50 Hz,
- ambient temperature from -15°C to +40°C.
Motors for building-in of size 56-90 are intended for
driving of appliances, where instead of separate housing it is more convenient to make use of
the frame of driven mechanism as a motor housing.
The bulid-in motors do not have their own housing. It is consists of sub-assemblies as
follows: wound stator core, wound rotor core as a cage casted from aluminum.
Stator core has a winding made from copper wire from which 3 leads are led out. These
outlets, suitable marked, are connected to the beginnings and the ends of phases.
Rotor with cast squirrel cage is delivered as a rough state without a shaft.
Protection degree of bulid-in motors is to be solved by a user, i.e. protection against touch,
penetration of solid bodies and water.
Other details and sub-assemblies such as: complete terminal boxes and fans can be
available on request
Click here for more information
SINGLE PHASE MOTORS
Single-phase induction motors frame size 90mm series SEhR
Description of the catalogue motors:
- general purpose motors; temperate climate,
- duty S1,
- rated voltage 230V,
- frequency 50 Hz,
- ambient temperature from -15°C to +40°C,
- standard paint colour RAL 5010.
SEhR version frames of motors made of drawn aluminium
section.
Applying new modern technology in manufacturing new series we reached: noise level of
motors is one acoustic class lower, higher efficiency, less weight, longer life of motors,
improvement of durability of parameters.
The series meets requirements of Polish Standard PN-EN 60034-1, international regulations
IEC 60034-1 and is completely interchangeable with 'g' series.
Click here for more information
Description of the catalogue motors:
- general purpose motors; temperate climate,
- duty S1,
- rated voltage 230V,
- frequency 50 Hz,
- ambient temperature from -15°C to +40°C,
- standard paint colour RAL 5010.
SEhR version frames of motors made of drawn aluminium
section.
Applying new modern technology in manufacturing new series we reached: noise level of
motors is one acoustic class lower, higher efficiency, less weight, longer life of motors,
improvement of durability of parameters.
The series meets requirements of Polish Standard PN-EN 60034-1, international regulations
IEC 60034-1 and is completely interchangeable with 'g' series.
Click here for more information
 |
 |
 |
 |
 |
 |
 |
KCG-ELECTRONICS LIMITED
The Power To Deliver Tomorrows Technology
The Power To Deliver Tomorrows Technology